How to clean your Respirator Mask

Taking care of your respirator is simple stuff, but it can have a big impact on your health and safety at work. L&A Safety explains the best way to keep your non-disposable respirator clean and how to prolong the life on your cartridges.

Most people never clean their respirators. Why? Maybe they love germs, or accumulated grime, or maybe, they just wipe it out with a rag occasionally and keep working. Hey, I’ll do it right from now on.

Masks are worn to protect workers from dangerous atmospheres, and properly cared for; they will continue doing that for quite some time. However, if you’re wearing a mask, chances are you’re not working in the cleanest environment and they need to be washed to remove any residue occasionally.

To clean your respirator, first wash your hands. You don’t want to take the dirt and replace it with the paint or chemicals you’ve been working with. If you’re not sure how to do it, check the written instructions that came with your mask. Make sure you don’t lose any seals or washers that may be in place with the cartridges.

It probably goes without saying, but we’ll say it anyway: you can’t wash your cartridges. If you have cartridges with rigid exteriors, you can wipe the dirt or over-spray off. But make sure you set them to the side when you are washing.

Next, hand wash the respirator face piece in warm water. Use a disinfectant soap. Check with the manufacturer to see if there are recommended brands.

After you have cleaned the respirator and all the parts, let them air-dry before reassembly.

The other important thing to remember about caring for your respirator is keeping your respirator and cartridges stored correctly. Sunlight, dust, extremes of both heat and cold, and chemicals can have a negative effect on the longevity of your mask.

Ideally the cartridges should be removed after each use and put in a zip-lock bag for storage. If you have a half-face mask, it will fit into a big bag without having to take the cartridges off. Always store your mask away from the job site or any other chemicals.

If you have any questions about your safety gear, respirators or safety equipment in general, contact L&A Safety today!

Why is Respiratory Protection important in Construction?

Respiratory protection is an important part of Personal Protective Equipment in Construction Work.

In any field of construction work it is of vital importance that all employees wear the appropriate task specific PPE, respiratory protective equipment is one of the most important pieces of PPE. Whether the employee is only using hand or power tools there is still a variety of industrial sprays, dust, fumes and particulate materials, amongst other respiratory hazards on the work site.

So it is not only necessary for the sake of health consciousness to protect yourself and your workers against respiratory hazards, but it is also an obligation due to the legal Occupational Health and Safety Act.

Looking for a wide range of safety equipment and high quality of PPE? Why not stop by one of L&A Safety's branches in Milnerton, Robertson or Vredenburg and place your order today!

There are gases, dusts, and toxic fumes present at every construction worksite that can make you very ill and some may even cause eventual death, some respiratory hazards such as carbon monoxide can make you unconscious or even kill you within minutes, other hazards such as asbestos can take years before they make you sick and can cause lung cancer.

There are methods such as engineering controls, for example good ventilation methods in an enclosed area, work practice controls such as using alternative cutting and grinding techniques, and administrative techniques where only the necessary workers who are performing a task are in the hazardous areas.

In most cases a simple dust mask will suffice but depending on the type of work and the hazardous materials other methods such as a full mask with a visor, a welding helmet, or a respirator may be required.

Respirators and respiratory protective equipment needs to be well maintained and kept clean, and any damaged equipment must be discarded of and replaced immediately.

Respiratory protection can save a life, hazards in the workplace may not seem as serious to you but regular exposure to certain materials and particles can lead to chronic illnesses and can cause drastic damage to your lungs. In some cases as with extreme hazardous materials, a few short exposures can cause death.

So remember in any workplace it is not only law but of utmost importance for your and the health and safety of your employees to always wear the task specific personal protective equipment and always to follow the Written safe Work procedures and Risk assessments step by step. Take care of your own personal safety first and then that of your fellow workers.

Asbestos Mask Protection – Myth Busted!

You’ve heard that asbestos is very dangerous, and it definitely is! You may think that you can get protection from asbestos by wearing a mask, well that is a dangerous untruth and one that could cause you serious health consequences.

Asbestos is nothing to trifle with and most masks are not actually going to protect you from the deadly fibre. If you are working with or near asbestos in your home, office or on a construction site, a mask isn’t enough to keep you safe from asbestos.

Myth – Asbestos isn’t dangerous if you wear a mask

   o   A basic face mask that you can buy at a home improvement store will offer very little or no protection from asbestos fibres. Asbestos dust and fibres can easily get around the edges of these types of masks and can be inhaled which puts your health at risk.

   o   To safely work around asbestos, you need a half-face respirator that completely shields your nose and mouth and seals tightly against your skin. A properly fitted respirator will purify the air you breathe and block asbestos fibres from entering your nose or mouth.

   o   Even a high quality respirator-type mask must be worn properly to ensure you’re protected. Facial hair can break the seal and allow asbestos fibres in. so, for a proper fit, you need to be clean shaven.

   o   A high quality respirator-type mask alone is not enough to protect you from asbestos if you are in an area where asbestos has been disturbed by removal efforts, construction, renovation, flood or fire. In addition to the mask you must wear head to toe disposable protective gear including a hat, gloves and shoe covers. These must then be misted with water and removed while the respirator is still on, placed in asbestos waste bags and then the mask can be removed. A thorough shower afterwards is also recommended.

   o   Asbestos fibre can cling to your clothing, skin, shoes or hair. If you are not coated entirely in protective gear when exposed to asbestos, not only are you putting your health at risk, but your family’s as well. Second hand exposure can be just as dangerous!

Wearing all the right personal protective equipment is essential to protecting your health when working with asbestos – make sure you protect yourself and your family.

For a wide variety of PPE at an affordable price, visit L&A Safety at one of their branches or call us today! Choose anything from ear protection and boiler suits to respirator masks!

How to choose the right respirator or dust mask

Home and garden projects may involve exposure to harmful chemicals and toxins, like paint fumes, solvents, dust, adhesives, pesticides and cleaning products. In addition to proper ventilation, a respirator or dust mask will go a long way in protecting your lungs and health.

However, respirators and dust masks aren’t all the same; there are different kinds to choose from. At home and around the workshop, a particulate filter or chemical cartridge respirator are likely to be all you’ll need. Take a look through L&A Safety's range of products, including a variety of respirators and dust masks!

Particulate Filters: These include disposable dust masks, which are the most common type of air-purifying devices for home use. Particulate filters can be disposable or reusable with replaceable filters. They cover your nose and mouth and provide protection from airborne particles, such as dust, mists, liquids and some fumes.

When you are choosing a dust mask, consider:

- Masks with an adjustable nose piece offer a tighter fit.

- Disposable masks with foam face seals will be more comfortable and a little more effective.

- Masks with an exhalation valve will make breathing easier.

- For highly toxic particles (such as asbestos), choose a non-disposable mask with sealing gaskets.

Chemical Cartridge Respirators: These respirators contain special carbon filtering material that absorbs gases and vapours from the air. The replaceable cartridges are inserted in a mask that seals tightly around the edges to block out unfiltered air. Cartridge respirators may be half-mask or full-face.

Respirator Safety Tips:

- Notice Smells
Change the filter if you notice any changes in smells or taste, or if your throat, nose, or lungs become irritated.

- Breathe Easy
You should also change your respirator if it becomes clogged and hard to breathe through.

- Keep Dry
Many respirators, especially disposable ones, become ineffective if they get wet.

- Follow Instructions
Replace filters as instructed on the package.

- Don’t Reuse
Disposable respirators aren’t meant to be used more than once.

- Throw Away if Broken
Discard any respirator or filter canister that is dirty or damaged. Replace gas masks if rubber seals are damaged.

A respirator is an extremely important device that protects your mouth and nose from any harmful chemicals or toxins. Make sure to choose the right respirator or dust mask according to your needs.

L&A Safety pride themselves on being a one stop destination for all of your Personal Protection Equipment - We are waiting to take your call, contact us today! Milnerton : 021 552 - 0665; Vredenburg : 022 713 - 3149; Robertson : 076 532 - 5533.